You are visiting a website that is not intended for your region

The page or information you have requested is intended for an audience outside the United States. By continuing to browse you confirm that you are a non-US resident requesting access to this page or information. Switch to the US site. 

This website uses cookies

By continuing to use this website you consent to using cookies. For more information about cookies and how we use them, please see our Privacy Policy.

Total Lift Bed

Advanced profiling bed

Upright positioning in bed for highly dependent patients

Prolonged bed rest and immobility of critically ill patients can lead to severe physical deconditioning, significant loss of muscle mass and increased muscle weakness that can result in extended time spent in both the ICU and the hospital¹. Recognition of the long term physical and psychological consequences of prolonged immobility has resulted in early mobilisation being advocated for ICU patients². While early standing and weight bearing is a desirable goal, achieving this consistently with critically ill patients can be a challenge for caregivers. Using only one or two caregivers, the Total Lift Bed™ can progressively move patients to full standing and weight bearing to aid rehabilitation early in the acute phase of critical illness.

References:
1. Truong AD, Fan E, Brower RG, Needham DM. Mobilizing patients in the intensive care unit from pathophysiology to clinical trials. Crit Care. 2009;13:216.
2. Morris PE, Goad A, Thompson C, et al: Early intensive care unit mobility therapy in the treatment of acute respiratory failure. Crit Care Med. 2008;36(8):2238-2243
Complying with early mobility protocols
• Without leaving the bed patients who need a graded transition from bed rest to supporting their full body weight, can be progressively moved to the standing position.

Patented Foot Lifter™ Footboard
• When the tilt function is activated, the patented Foot Lifter moves towards the patient’s feet. When contact is made the bed begins gently tilting to the desired angle or weight bearing ratio while maintaining the patient in position to help avoid the need for repositioning. The Foot Lifter will automatically adjust to become flush with the floor for patient egress from the bed if appropriate.

Safety during movement and while standing
• A flexible strap system helps secure the patient in position during movement to the upright position.

Patented weight bearing control system
• As the bed tilts the change in weight bearing achieved by the patient is displayed on the Foot Lifter footboard. This visual feedback helps caregivers to monitor progress, and set milestones against rehabilitation and mobility objectives.

Flexible positioning
• In addition to progressive standing and weight bearing, the Total Lift Bed offers flexible patient positioning to help with care procedures and patient mobilisation. It also allows for Tredelenburg position which provides head down positioning for selected care procedures.

Skin protection
• The integrated five zone pressure redistribution surface provides caregivers with a choice of low air loss or alternating pressure options to help in the prevention and management of pressure injury. Mattress firmness can be altered using the comfort controls.

In bed chair position
• The in bed chair facility helps orientate the patient to a more upright position with legs down between standing episodes. The foot board’s position can be adjusted from the handset to accommodate different patient needs.

Total Lift Bed Specifications

Technical Information


Length
Overall length (in regular position)85.83 in (218 cm)
Overall length - Fully extended (foot lifter out)89.76 in (228 cm)
Width
Overall width - With side rails

40.95 in (104 cm)

Height

 

Low position - deck to floor

20.67 in (52.5 cm)

High position - deck to floor

29.72 in (75.5 cm)

From top of bed to floor (standing position)
80 in (204 cm)
Clearance

From under frame to floor
1.38 in (3.5 cm) 
Caster diameter5 in (12.7 cm)

Foot Lifter

Moves over mattress 7.9 in (20 cm) towards Head Rest

Moves out of bed - 3.95 in (10 cm)

Moves up in chair position until contact with feet or max of 7.9 in (20 cm).

Safe working load is 616 lb (280 kg) 

Max patient weight capacity is 425 lb (193 kg)

Standards

CE according to MDD 93/42 EEC, IEC 60601-1 3rd Ed. IEC 60601-2-52, IEC606-1-6, IEC62366, FDA Registration (CFR21 Part 820).

 

The model listed here is manufactured by VitalGo Systems, Inc. and is distributed under contract by Arjo AB. Packaging, labelling and documentation supplied with the product will reflect this.

Total Lift Bed Brochure

Category: Brochure/Booklet

File name: Arjo.Total Lift Bed.Brochure.1.0.INT.EN.pdf

Type: PDF

Size: 0.69 Mb

EN-INT


* Please check with your local sales representative if the product is available for sale in your country.