Specifications

The Maxi Sky® 2 has been developed to further improve the situation for residents/patients and caregivers. The extensive spreader bar portolio, together with Quick-Connect™ enables the caregiver to carry out more optimised resident/patient transfers.

Specifications

Measurements & weights

Max safe working load 120 kg (265 lbs), 200 kg (440 lbs), 272 kg (600 lbs)
Weight, complete (four-function model) 12.3 kg (27 lbs)
Weight, complete (two-function model) 11.6 kg (26 lbs)

Lifting speeds:

6 cm/sec (2.4"/sec) at 0 kg (0 lbs)
3.9 cm/sec (1.5"/sec) at 100 kg (220 lbs)
3.5 cm/sec (1.4"/sec) at 200 kg (440 lbs)
2.5 cm/sec (1.0"/sec) at 272 kg (600 lbs)

General

Adjustable horizontal displacement speeds 10 cm, 15 cm, 20 cm/sec (4", 6", 8"/sec)
Preset at 20 cm/sec (8"/sec)
Electronic microprocessor soft start and stop motor control
Maintenance required indicator visual LED, symbol and code on LCD screen
Lift, protection class, shock prevention internally powered equipment
Strap length 2300 mm (90.6")
IP Class IP24
Noise level for raising and lowering, with or without load. 61 dBA Max

Batteries

2 batteries 12 V, 5 Ah, sealed rechargeable valve regulated lead acid battery
Battery capacity provides up to 120 transfers with a load of 100 kg (220 lbs), up to 70
transfers with a load of 200 kg (440 lbs)
Low battery indicator audible, visual LED and battery status on LCD screen
Charging indicators blinking green LED and battery scrolling symbol on screen
Compatible with ECS track system
Handheld control unit
Easy to clean santopren tactile buttons IPX7
ABS fire retardant V0
Charger unit 100-240 Vac / 50-60 Hz / 27 VA
Battery charger safety protection class 2, double insulated
Clip on charger anywhere on the track

Safety features

Auxiliary up and down emergency buttons located on the motor cab
Emergency stopping device (pull cord) accessible from the ground that stops all electric functions
Manual emergency lowering device located on the motor cab
Emergency brake triple centrifugal emergency brake system
Return to charge function weight sensor cut-off initiated by caregiver (optional)
ABS FR casing fire retardant V0
Complies with ISO10535:2006, IEC60601-1:2005

Product configurations

2 or 4 function
ECS or charging station (CSTAT)
Handheld control unit standard or battery-powered DPS

General

  • New design - easy access to main components w/o tools
  • New software platform - ECS, IR and Powered DPS ready
  • USB port to install upgraded firmware and to retrieve usage monitoring data
  • Self diagnostic - Proactively informs the user about maintenance - and malfunction code
  • New color display communicating the status of the lift - battery status, usage monitoring data
  • Red/Green LED showing the status of teh lift in combination with the color display
  • Customizing options can easily be programmed (RTC, RTH, PPP)
  • Flexible SWL 272 kg/600 lbs, 200 kg/440 lbs, 120 kg/265 lbs depending on the requirements
  • New Quick-Connect system

 

Accessories (SWL 272 kg/600 lbs)

  • 2 point loop spreader bar - small
  • 2 point loop spreader bar - medium
  • 4 point loop spreader bar - large
  • 4 point clip DPS - flat manual
  • 4 point clip DPS - open manual
  • 4 point clip powered DPS - medium
  • 4 point clip powered DPS - large
  • Stretcher frame
  • Electronic scale - class III approved

 

Configurations (see more on KWIKtrak)

 

  • Flexible tracking system comprising straight track, curves and connection features allows single track or room covering (X-Y) configurations to be created
  • Straight track  - height 90, 140 and 180 mm in various lengths
  • Curved track - 45 and 90 degrees
  • Embedded track - completely flush to the ceiling
  • New X-Y trolley allowing optimized room configuration
  • Curtain pass through solution
  • Mirror strip kit